tuc0
Well-Known Member
Your mouse is the touchpad?
Post your gaming rigs pictures!
- Thread starter IcEWoLF
- Start date
Your mouse is the touchpad?
PoWdA
New Member
I keep saying the same thing but I have never had an issue with heat but damn it looks so cool
tuc0
Well-Known Member
Hey pare, you prolly don't need watercooling. Unless you're an overclocking monster like Hunter.
I considered one too, but I never have any issues with overheating, so I'm stuck with aircooling.
And, when I overclock, I only do the multiplier(if possible) and/or frontside bus, never the voltage.
Nutbutter's cpu's self-contained Liquid cooling is nice. I would do that next build for myself (only $60.00).
http://www.amazon.com/s/ref=nb_sb_ss_c_1_8?url=search-alias%3Delectronics&field-keywords=cpu+liquid+cooling&sprefix=cpu+liqu
Ghonzo
The 47 Ronin
Nah my mouse is on the mouse pad 2/3 of it was cut off XD
i guess ill post mine up even tho it's a mid-end.
Antec 900 Case
CPU E8400 OC to 3.8 from stock 3.0
Lanparty DK X38
OCZ DDR2 800 4g
EVGA GTX 285 SLI OC too 700 Core, 1300 Mem From 675 Core and 1269 Mem stock
OCZ 600w powersupply
Asus Dvd Burner
4 HDD Total of 2.7TB
Waterchill Only to Cpu. Going to get another one for both Gpu later on
And here is the picture. Be Surprise By The Space.
Antec 900 Case
CPU E8400 OC to 3.8 from stock 3.0
Lanparty DK X38
OCZ DDR2 800 4g
EVGA GTX 285 SLI OC too 700 Core, 1300 Mem From 675 Core and 1269 Mem stock
OCZ 600w powersupply
Asus Dvd Burner
4 HDD Total of 2.7TB
Waterchill Only to Cpu. Going to get another one for both Gpu later on
And here is the picture. Be Surprise By The Space.
i guess ill post mine up even tho it's a mid-end.
Antec 900 Case
CPU E8400 OC to 3.8 from stock 3.0
Lanparty DK X38
OCZ DDR2 800 4g
EVGA GTX 285 SLI OC too 700 Core, 1300 Mem From 675 Core and 1269 Mem stock
OCZ 600w powersupply
Asus Dvd Burner
4 HDD Total of 2.7TB
Waterchill Only to Cpu. Going to get another one for both Gpu later on
And here is the picture. Be Surprise By The Space.
Antec 900 Case
CPU E8400 OC to 3.8 from stock 3.0
Lanparty DK X38
OCZ DDR2 800 4g
EVGA GTX 285 SLI OC too 700 Core, 1300 Mem From 675 Core and 1269 Mem stock
OCZ 600w powersupply
Asus Dvd Burner
4 HDD Total of 2.7TB
Waterchill Only to Cpu. Going to get another one for both Gpu later on
And here is the picture. Be Surprise By The Space.
Spray
The 47 Ronin
i guess ill post mine up even tho it's a mid-end.
Antec 900 Case
CPU E8400 OC to 3.8 from stock 3.0
Lanparty DK X38
OCZ DDR2 800 4g
EVGA GTX 285 SLI OC too 700 Core, 1300 Mem From 675 Core and 1269 Mem stock
OCZ 600w powersupply
Asus Dvd Burner
4 HDD Total of 2.7TB
Waterchill Only to Cpu. Going to get another one for both Gpu later on
And here is the picture. Be Surprise By The Space.
Hey Ace, don't you need metal fasteners on those tubes?
no they dont all you do is pull and it auto tight which is not that good but also easy to clean and change. push the blue circle in and push tube out to remove tube to tighten it just push all the way in and pull out. i have to test it atleast 1 hour to make sure it is in place.
